Signal Relays
TE Connectivity Industrial 릴레이
Series
IM
4G telecom/signal relay/switching relay
Slim line 10x6mm, low-profile 5.65mm
Switching power 60W/62.5VA
Switching voltage 220VDC/250VAC
Monostable + Bistable
Low rated coil power
High dielectric version
High current version up to 5 A
High contact stability version
Bifurcated contacts + single contact
IMB
4G telecom/signal relay/switching relay
Slim line 10x6mm, low-profile 5.65mm
Switching power 60W/62.5VA
Switching voltage 220VDC/250VAC
Monostable + Bistable
Very high dielectric version
Bifurcated contacts
IMC
4G telecom/signal relay/switching relay
Slim line 10x6mm, low-profile 5.65mm
Switching power 60W/62.5VA
Switching voltage 220VDC/250VAC
Monostable + Bistable
High dielectric version
High current version up to 4 A
Bifurcated contacts
Contact Data
Contact arrangement
Rated voltage
Rated current
Switching power / Max. break
Min. recommended
contact load
Initial contact resistance
2 form C, 2 CO
Single contact + Bifurcated contacts
250VAC/220VDC
2/5A
60W/62.5VA
100μV/1μA
<50mΩ at 10mA/30mV I: < 100mΩ
1 form A, 1 NO
Bifurcated contacts
250VAC/220VDC
2A
60W/62.5VA
100μV/1μA
<100mΩ at 10mA/30mV
1 form C, 1 CO
Bifurcated contacts
250VAC/220VDC
2/4A
60W/62.5VA
100μV/1μA
<50mΩ at 10mA/ 30mV
Coil Data
Magnetic system
Rated coil voltage
Rated coil power
Polarized
1.5 to 24VDC
50 to 200mW-/-
Polarized
1.5 to 24VDC
140mW/-/-
Polarized
1.5 to 24VDC
140mW/-/-
Dielectric Strength
Initial dielectric strength
between open contacts
between contact and coil
between adjacent contacts
Initial surge withstand voltage
between open contacts
between contact and coil
between adjacent contacts
Isolation 100/900MHz
Insertion loss 100/900MHz
Volt. standing wave ratio
100/900MHz
Capacitance
between open contacts
750 to 1500Vrms
1500 to 1800Vrms
750 to 1800Vrms
1000 to 2500V
2000 to 2500V
1000 to 2500V
37.0/18.8dB
0.03/0.33dB
1.06/1.49
max. 1pF
2500Vrms
3500Vrms
3500V
4900V
37.0/18.8dB
0.03/0.33dB
1.06/1.49
max. 1pF
1000 to 1600Vrms
1800 to 2200Vrms
1500 to 2200V
2500 to 3000V
37.0/18.8dB
0.03/0.33dB
1.06/1.49
max. 1pF
1) Recommended minimum load indication for contact material: AU and gold plated: 1mA at 6VDC; AgNi0.15 and AgNi90/10:
10mA at 12VDC: AgCdO and AgSnO2: 100mA at 12VDC. Please contact technical support for detailed technical data.
2) Footprint images are representative. For a complete selection, refer to the TE data sheet via the link above.
Series
IMD/IME
4G telecom/signal relay/switching relay
Slim line 10x6mm, low-profile 5.65mm
Switching power 60W/62.5VA
Switching voltage 220VDC/250VAC
Monostable
Bifurcated contacts
P2/HIGH DIELECTRIC VERSION
Small Signal relay
Slim line 15×7.5mm
Switching current max. 5A
High dielectric version
Meets Telcordia Technologies Inc.
requirements
P2 LIGHTING
Small signal relay
Slim line 15×7.5mm
Switching current max. 5A
High dielectric strength 3kV
VDE certified for LED tubes
Contact Data
Contact arrangement
Rated voltage
Rated current
Switching power / Max. break
Min. recommended
contact load
Initial contact resistance
2 form B, 2 NC
2 form A, 2 NO
Bifurcated contacts
250VAC/220VDC
2A
60W/62.5VA
100μV/1μA
<50mΩ at 10mA/20mV
2 form C, 2 CO
Bifurcated contacts
250VAC/220VDC
2A
60W/62.5VA
100μV/1μA
<50mΩ at 10mA/20mV
2 form C, 2 CO
Bifurcated contacts
250VAC/220VDC
2A
60W/62.5VA
100μV/1μA
<50mΩ at 10mA/20mV
Coil Data
Magnetic system
Rated coil voltage
Rated coil power
Polarized
1.5 to 24VDC
140mW/-/-
Polarized
2.4 to 24VDC
140mW/70mW/140mW
Polarized
3 to 12VDC
140mW – 1 coil version
Dielectric Strength
Initial dielectric strength
between open contacts
between contact and coil
between adjacent contacts
Initial surge withstand voltage
between open contacts
between contact and coil
between adjacent contacts
Isolation 100/900MHz
Insertion loss 100/900MHz
Volt. standing wave ratio
100/900MHz
Capacitance
between open contacts
1000Vrms
1800Vrms
1000Vrms
1500V
2500V
1500V
37.0/18.8dB
0.03/0.33dB
1.6/1.49
max. 1pF
1000 to 1500Vrms
1500Vrms
1000 to 1500Vrms
2000 to 2500Vrms
2500V
2500V
1500Vrms
3000Vrms
1500Vrms
6000Vrms
1) Recommended minimum load indication for contact material: AU and gold plated: 1mA at 6VDC; AgNi0.15 and AgNi90/10:
10mA at 12VDC: AgCdO and AgSnO2: 100mA at 12VDC. Please contact technical support for detailed technical data.
2) Footprint images are representative. For a complete selection, refer to the TE data sheet via the link above.
Contact Us
경기도 파주시 가람로 124 봉명타워 605호
(+82) 010-5632-0312
andus01@and-us.kr